Overview of Stolle Standun Bodymakers

Standun Bodymaker
Stolle Standun Bodymakers are the leaders in the industry that you can completely trust as far as production of two-piece DWI can bodies is concerned. They offer numerous models of models of Stundun Bodymakers that make wide varieties of can diameter and heights of either Aluminum material or steel material. All of the Standun Bodymakers offer state of the art mechanical components to allow the highest speeds and efficiency in operation as well as easy access stainless steel guards and covers, and integral system lubrication.

The DWI can bodies are specialized horizontal presses that are modified to maintain extremely close tolerance suitable for finished can bodies. They are built ruggedly to offer a quality product on a daily basis. The Stolle family of Bodymakers consists of B7, which is the only body maker that is designed to offer the most popular can of beverages of size up to 500 millilitres with a single stroke of length 400 SPM. The products are well designed and well calculated to give the best results.

The Standun B5A is the first Stolle family designed specifically to come up with thin wall bodies of the aerosol can. It uses thirty to forty percent less metal compared to a three-piece aerosol. The pride modular tool pack is designed to maintain precise wall accuracies in times of sustained high-speed ironing of the can bodies.

Different kinds of Stundun Bodymaker

Standun B7 Bodymaker

As mentioned before, this is the only body maker designed to produce the most widely known beverage can. The can sizes range up to 500 ml with a 400 SPM single stroke length.

Other key specifications include:

  • It requires a minimum air supply of 5.98 psi
  • It occupies a surface area of 145 square fits including working area and electrical console.
  • It can withstand water supply with up to a maximum temperature of 85 degrees F heat exchanger for cooling and machine lubrication system.
  • It requires a standard drive motor (75 HP AC)
  • The clutch brake is an air operated brake for slowing down speed.
  • It requires a 20 GPM minimum coolant supply (tool pack) at 30 PSI hence the customer needs to supply pump with filter assembly.
  • It requires 75 gallons (285 liters) for lubrication. The lubricant is very essential in the hydrostatic system and integral system to offer protection against failure.

Stand B6 Series Bodymakers

It consists of four models for can Heights that ranges from 76.2 millimeters to 17.2 millimeters. It speed varies from 300 SPM to 400 SPM and this depends on the height and diameter of the can. The can diameter normally ranges from 202 to 307. It can withstand water supply of a maximum temperature up to 29 degrees centigrade for cooling and machine lubrication system.

Standun B5 Series Bodymakers

It also consists of four models with can heights ranging from 139.7 mm to 224.8 mm. The speed ranges from 210 SPM to 400 SPM and depends on the height and diameter of the can. The diameter of the can also ranges from 202 to 307. It is capable of producing a redraw of three to four strokes. Its production speed depends on the stroke length, the diameter of the can as well as the mechanical configuration of the can.

Other specifications include:

  • The body maker occupies a surface area of 204 square fits including working area and electrical console.
  • It requires an air supply of 50 SCFM.
  • It can withstand water supply of a maximum temperature up to 29 degrees centigrade for cooling and machine lubrication system.
  • The clutch brake is an air operated brake for slowing down speed.
  • It requires a 20 GPM minimum coolant supply (tool pack) at 30 PSI hence the customer needs to supply pump with filter assembly.
  • It requires 50 gallons for lubrication that is equivalent to 189 litres. The lubricant is necessary for the hydrostatic system and integral system to offer failure protection.
  • It requires a standard drive motor (75 HP AC)

Standun B5A Series Bodymaker for Two-Piece Thinwall DWI Aerosol

Can be configured to give a full range of typical aerosol can. The can size ranges from 96 mm to 210.8 mm with up to stroke machine of 29. The body maker operates up to a speed of 260 SPM. It produces cans of diameter ranging from 35 mm to 73 mm.